manualshive.com logo in svg

Avaya IP403 Office, Руководство по установке, Страница: 111 / 115

Поделиться
Скачать
Avaya IP403 Office Скачать руководство пользователя страница 111

SNMP 

Installation Manual 

Page 105 

IP Office 2.1 

40DHB0002USCL Issue 10c (11th May 2004) 

CastleRock SNMPc 5.1.6c and earlier: 

For MIBs to be used with SNMPc they must first be copied into its mibfiles directory, which is normally 
C:\Program Files\SNMPc Network Manager\mibfiles. MIBs are installed by selecting 

Config

 and 

MIB 

Database 

from the SNMPc menu and then using the 

Add

 option and selecting the MIB file from the list 

presented to load and compile it. The following MIBs must be installed in the order listed to fully SNMP 
manage an IP Office system: 

MIB file

 

Source

 

ENTITY-MIB 

snmp_mibs\Standard on IP Office Admin CD 

AVAYAGEN-MIB.mib snmp_mibs\IPOffice on IP Office Admin CD 

IPO-PROD-MIB.mib snmp_mibs\IPOffice on IP Office Admin CD 

IPO-MIB.mib 

snmp_mibs\IPOffice on IP Office Admin CD 

INET-ADDRESS-MIB.mib 

snmp_mibs\Standard on IP Office Admin CD 

INTEGRATED-SERVICES-MIB  snmp_mibs\Standard on IP Office Admin CD 

DIFFSERV-DSCP-TC.mib 

snmp_mibs\Standard on IP Office Admin CD 

DIFFSERV-MIB.mib 

snmp_mibs\Standard on IP Office Admin CD 

IPO-PHONES-MIB.mib 

snmp_mibs\IPOffice on IP Office Admin CD 

The MIB installation instructions provided above are correct for CastleRock SNMPc V5.0.8 and later. For 
V5.0.1 of CastleRock SNMPc the following must be carried out: 

1.  Copy all of the IP Office MIBs and standard MIBs from the admin CD to the SNMPc mibfiles 

directory. 

2.  In the SNMPc mibfiles directory open the files STANDARD.mib and SNMPv2-SMI.mib in 

Notepad. 

3.  In the SNMPv2-SMI.mib file find the definition of zeroDotZero and copy this to the clipboard. 

4.  In the STANDARD.MIB file find the SNMPv2-SMI section and paste in the definition of 

zeroDotZero from the clipboard before the end of this section (just before the END statement). 

5.  Save the modified STANDARD.MIB file. 

6.  Add the MIB file SNMP-FRAMEWORK-MIB.mib to the MIB database using the instructions 

provided in the IP Office installation guide. 

7.  Add all the MIB files listed in the instructions provided in the IP Office installation guide in the 

order given. 

8.  Compile the MIBs ready for use. 

The reason for this is: The IPO-PHONES-MIB.mib relies upon the DIFFSERV-MIB.mib for the definition 
of the textual convention of IndexInteger. The DIFFSERV-MIB needs the definition of the textual 
convention zeroDotZero which is normally defined in SNMPv2-SMI.mib. However including SNMPv2-
SMI.mib in the MIB file compilation list results in errors due to conflicts with what appear to be internal 
definitions within SNMPc and the SNMPv2-SMI section in its STANDARD.mib file. Therefore to resolve 
the issue the required definition of zeroDotZero must be placed in the SNMPv2-SMI section in SNMPc's 
STANDARD.mib file. 

 

 

  

Содержание IP403 Office




















































































































Отзывы:

Нет отзывов