manualshive.com logo in svg

Avaya IP403 Office, Руководство по установке, Страница: 17 / 115

Поделиться
Скачать
Avaya IP403 Office Скачать руководство пользователя страница 17

IP403 Office Platform 

Installation Manual 

Page 11 

IP Office 2.1 

40DHB0002USCL Issue 10c (11th May 2004) 

IP403 Office - Front View 

 

• 

DT/DS Ports

 

• 

DT ports are for connection to Avaya 2000 series telephones. 

• 

DS ports are for connection to Avaya 4400, 2420 and/or 6400 series telephones. 

• 

At default DT ports are set to A-Law PCM encoding and DS ports to either A-Law or -Law 
PCM encoding . However, both ports can be switched in software - refer to the 
Administration Manager Manual for details). Using DT Line Cords and standard structured 
wiring, these RJ45 ports can be extended to the required telephone location. In addition, 
converters can be used to provide BT New Plan sockets (431A/631A) if required. When 
telephones are equipped with line cords that terminate in RJ11 plugs, then pin-to-pin 
RJ11/RJ45 adapters should be used. 

• 

Plain Ordinary Telephone (POTS) Ports

 

These two ports are used for connection to standard analog telephones, fax machines and 
modems. They 

must 

not be connect to trunks. Using standard structured wiring, these RJ45 

ports can be extended to the required telephone location. Converters can be used to provide BT 
New Plan sockets (431A/631A) if required. When devices are equipped with line cords that 
terminate in RJ11 plugs, then pin-to-pin RJ11/RJ45 adapters should be used. 

• 

LAN Ports

 

The eight auto-negotiating 10/100 BaseT LAN hub ports are used for PC and server connectivity. 
They can also be used to connect to the optional IP400 WAN3 Expansion Module and IP 
telephones. LAN ports allow information relating to incoming and outgoing telephone calls to be 
forwarded to PC based applications. They also provide access to the router 
functionality/configuration of the IP403 Office platform for both data and Voice over IP (VoIP) 
calls. (Where IP telephony is required, a suitable switch LAN switch with QoS capabilities.) This 
eight port auto-negotiating 10/100 BaseT LAN hub has a single MAC address (printed on the 
base of the unit). Where more than eight LAN connections are required, the eighth LAN port can 
be used for cascading to other hubs. The 

Uplink 

push button to the right of this port is used to 

set the mode. When the 

Uplink 

switch is in the 

out 

position the port can be connected to another 

hub without the need for a crossover cable, i.e. the port is an MDI type port. When the 

Uplink 

switch is in the 

in 

position the port can be connected directly to a PC.  

 

Cables 

IP403 Office DT PRI 30 E1 & DS PRI 24 T1 are supplied with one red CAT5E  cable. IP403 Office DT 
BRI 8 & DS Analog 4 are supplied with four red CAT5E cables.  

Содержание IP403 Office




















































































































Отзывы:

Нет отзывов