manualshive.com logo in svg

Avaya IP403 Office, Руководство по установке, Страница: 12 / 115

Поделиться
Скачать
Avaya IP403 Office Скачать руководство пользователя страница 12

IP Office Installation 

Installation Manual 

Page 6 

IP Office 2.1 

40DHB0002USCL Issue 10c (11th May 2004) 

IP401 Compact Office - Front View 

 

• 

Note

 

The IP Compact Office DT4 is shown above. The IP Compact Office DT2 does not have 
the top row (labeled 

3 DT 4

,

 3 POT 4

,

 5 LAN 6 

and

 7 LAN 8

) of RJ45 ports fitted.  

• 

DT Ports

 

DT ports are used for connection to Avaya 2000 series telephones  and support either A-Law or -
Law PCM encoding (default A-Law). Using DT Line Cords and standard structured wiring, these 
RJ45 ports can be extended to the required telephone location. In addition, converters can be 
used to provide BT New Plan sockets (431A/631A) if required. When telephones are equipped 
with line cords that terminate in RJ11 plugs, then pin-to-pin RJ11/RJ45 adapters should be used. 

• 

Plain Ordinary Telephone (POT) Ports

 

These ports are used for connection to standard analog telephones, fax machines and modems. 
These ports 

must not 

be used for connection to trunks. Using standard structured wiring, these 

RJ45 ports can be extended to the required telephone location. Converters can be used to 
provide BT New Plan sockets (431A/631A) if required. When telephones are equipped with line 
cords that terminate in RJ11 plugs, then pin-to-pin RJ11/RJ45 adapters should be used. 

• 

LAN Ports

 

The auto-negotiating 10/100 BaseT LAN hub ports are used for PC and server connectivity. They 
can also be used to connect to IP telephones (Avaya 4600 IP series). 

• 

LAN ports allow information relating to incoming and outgoing telephone calls to be 
forwarded to PC based applications. They also provide access to the router 
functionality/configuration of the IP401 Compact Office platform for both data and Voice 
over IP (VoIP) calls. The auto-negotiating 10/100 BaseT LAN hub ports support a single 
MAC address only (printed on base of unit). 

• 

Where more than eight LAN connections are required, the fourth LAN port can be used 
for cascading to other hubs. The 

Uplink 

push button to the right of this port is used to set 

the mode. When the 

Uplink 

switch is in the 

out 

position the port can be connected to 

another hub without the need for a crossover cable, i.e. the port is an MDI type port. 
When the 

Uplink 

switch is in the 

in

 position the port can be connected directly to a PC.  

Cables 

IP401 Compact Office 2 is supplied with one red CAT5E cable. The Compact Office 4 is supplied with 
two red CAT5E cables.  

Содержание IP403 Office




















































































































Отзывы:

Нет отзывов