Avaya IP403 Office, Руководство по установке, Страница: 73 / 115

Telephone Installation
Installation Manual Page 67
IP Office 2.1 40DHB0002USCL Issue 10c (11th May 2004)
Wall Mounting 2000 Series Telephones
Mounting brackets exist which clip onto the base on IP Office telephones. These brackets (two required
per telephone) can be used to either raise the desk position of the telephone or for wall mounting. Before
wall mounting a telephone, check that the surface is flat, vertical and not subject to movement or
vibration.
To wall mount an IP Office telephone :
1. Using the dimensions given below, mark the position for the screw holes. Ensure that adequate
clearance above and below the telephone is allowed.
Additional Items :
– Two No. 8 Pan
head or Round
head screws. –
Two wall plugs. –
Drill and drill bit. –
Screwdriver.
2. Drill the necessary holes and insert the wall plugs.
3. Insert the screws, leaving the heads approximately 3mm proud of the surface (check by clipping
a bracket over the screw head).
4. Attach the brackets to the telephone. Then slide the bracket key-slots over the screw-heads.
5. Reverse the position of the handset retainer tab (located below the hook switch on the
telephone). This keeps the handset in place whilst the telephone is mounted on the wall.