Avaya IP403 Office Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 115

Avaya IP403 Office Скачать руководство пользователя страница 18

IP Office Installation

Installation Manual

Page 12

IP Office 2.1

40DHB0002USCL Issue 10c (11th May 2004)

IP403 Office - Rear View

•

External O/P Socket

Two relay ports that allow externally powered circuits to be controlled via a single 3.5mm stereo
jack socket.

•

DC Power I/P Socket

Socket for the external 24V DC unregulated power supply (supplied with equipment).

•

DTE Port

A 25-way D-type socket. Used for connection to PCs, servers and EFTPOS devices or terminals.

•

Slot A/Slot B: BRI/PRI/ALOG Ports

The trunk interface modules are fitted into either Slots A or B and can consist of any combination
of:

•

Quad Analog - 4 trunks.

•

PRI E1/PRI E1-R2: 30 trunks.

•

PRI T1: 24B trunks or 23B+1D trunks.
PRI T1 trunks support both ISDN and Analog emulation. The default setting is 23B+1D
and is switchable in the installation software to provide 24B trunks.

•

Quad BRI: 8 trunks.

•

WAN Port

This port supports a single synchronous data connection, which can be X.21, V.35 or V.24. The
selection of the required interface is automatically determined from the pin-out of the cable
plugged into the 'WAN' port. This cable

must be

connected before power is applied for auto

detection to work. Connection to a Digital Leased Circuit is made by connecting the WAN port on
the rear of the unit to the existing Network Terminating Unit (NTU) via the appropriate X.21, V.35
or V.24 cable. This interface is identical to those on the WAN3 Expansion Module.

•

USB Interface:

Not used.

•

Expansion Ports 1-3:

Used to provide access to the optional

Expansion Modules

which allow

the IP403 Office to be expanded to 100 extensions.

•

Audio I/P Socket:

A single 3.5mm stereo or mono jack socket that enables input from an

external 'Music-on-Hold' source.

«
...
16
17
18
19
20
...
»

Содержание IP403 Office




















































































































Отзывы:

Нет отзывов