manualshive.com logo in svg

Avaya IP403 Office, Руководство по установке, Страница: 37 / 115

Поделиться
Скачать
Avaya IP403 Office Скачать руководство пользователя страница 37

Expansion Modules 

Installation Manual 

Page 31 

IP Office 2.1 

40DHB0002USCL Issue 10c (11th May 2004) 

IP400 Analog Trunk 16 

 

• 

Analog Trunk Ports

 

These ports are used for connection to standard analog trunks (loop start or ground start). Using 
standard structured wiring, these RJ45 ports can be extended to the required trunk sockets. 
Trunk ports 1 and 2 are, in the event of power failure, automatically switched to PF1 and PF2 
respectively on the rear of the unit. 

 

 

• 

Expansion Port

 

Used to connect the Analog Trunk Expansion Module an Expansion Ports of an IP400 Office 
platform. 

• 

DC Power I/P Socket

 

Socket for the external 24V DC unregulated power supply (supplied with kit). 

• 

Power Fail Trunks

 

These two ports

 must be 

set and connected to Loop Start trunks only. POTs plugged into these 

two sockets are mapped to trunk ports 1 & 2 such that, in the event of a mains power failure, PF1 
and PF2 can operate as 'hot lines' to the emergency services (eg. 911, etc).  

• 

Protective Grounding Point

 

Within the USA a protective grounding 

must be permanently

 fitted. Connection of this protective 

grounding requires the use of suitable tools and 

must be 

connected at both ends before 

connection is made to the telecommunications network.  

 

IP400 Analog Trunk 16 is supplied with one blue Expansion Interconnect cable.  

 

  

Содержание IP403 Office




















































































































Отзывы:

Нет отзывов