Avaya IP403 Office Скачать руководство пользователя страница 60

Страница: 60 / 115

IP Office Installation

Installation Manual

Page 54

IP Office 2.1

40DHB0002USCL Issue 10c (11th May 2004)

IP401 Expansion and Installation of Integral Modules

An IP401 Compact Office 2 can be expanded to an IP401 Compact Office 4.

Either unit can also be expanded with addition of a WAN card, a Voice Compression Module 5 (VCM5)
and/or a VME module (providing memory capacity for integral voice mail).

CAUTION -

While installing modules, ensure that you wear aground wrist strap that is connected

to a suitable grounding point.

2. To add a VME memory card you do not need to de-assemble a module, simply insert the VME

memory card (item

(1)

) into the slot in the rear panel below the WAN port position (item

(2)

3. Remove the top cover (item

(3)

) from the base cover by removing the four retaining screws (two

either side - items

(4)

) and proceed as follows.

4. To expand an IP401 Compact Office 2 to an IP Compact Office 4:

•

Remove and discard the front panel (item

(5)

•

Remove the rear panel (item

(6)

). Only discard if a WAN module is being fitted (see

below).

•

On the rear panel, press out the molding for the additional BRI RJ45 socket (item

(7)

•

Plug the expansion board (item

(8)

) onto it's sockets and stand-off hex. pillars. Ensure

that the additional BRI RJ45 socket slots into the hole in the rear panel (item

(7)

). Secure

the expansion board (item

(8)

) with the three retaining screws.

•

Mount the new front and existing rear panels if a WAN Module is not being fitted. If a
WAN module is being fitted, see below.

5. To add a WAN module:

•

Remove and discard the rear panel (item

(6)

•

Fit the new rear panel (with slot for WAN port 27-way D-type, items

(6)

and

(2)

•

Mount WAN Module (item

(9)

) in position and secure with the two snap-in spacers.

6. To add a Voice Compression Module (VCM5):

•

Mount the VCM Module (item

(10)

) in position.

•

Secure with the two snap-in spacers.

Содержание IP403 Office




















































































































Результаты поиска

Содержание IP403 Office

Отзывы:

Avaya IP403 Office, Руководство по установке, Страница: 60 / 115

Результаты поиска

Содержание IP403 Office

Отзывы: