Information
If an end position cannot be set:
Ò
Check the type of control unit in actuator.
Information
The end positions can be approached (via push buttons and selector switch
in position LOCAL), even during motor operation. For setting, the selector
switch must be in position 0 (OFF).
47
Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1
Non-Intrusive
Operation instructions
with actuator controls AUMATIC ACExC 01.1 Profibus DP
Valve damage due to direct approaching of mechanical end stop dur-
ing motor operation!
Ò
During motor operation, interrupt travel before reaching the mechanical
valve/gearbox end stop (press push button STOP ).
NOTICE
