6.3.2 Structural design and navigation
The indications on the display are divided into 3 groups:
.
Group
S
= status indications
.
Group
M
= menu (settings)
.
Group
D
= diagnostic indications
The active group is displayed on the top right corner of the display.
Change groups
Change from group
S
to group
M
:
Ò
Press
C
push button and hold it down for approx. 3 seconds until group
M0
appears.
Change from group
S
to group
D
:
Ò
Press
C
push button and hold it down until group
D0
appears
(group
M
is hereby skipped).
Change from any group
M
or
D
back to group
S
:
Ò
Briefly press
C
.
Scrolling
Ò
Press
qp
:
The triangles
in the top left corner of the display indicate the possible
scrolling direction (within one group) of scrolling.
Enter the password
In the menu (group
M
), the settings are protected by a password.
To change the parameters, a password must first be entered.
The following default password is set in the factory: 0000.
After selecting
EDIT
, the following is displayed:
1. Select figures 0 to 9: Press
qp
.
2. Move to the next position: Press
8
.
3. Repeat steps 1 and 2 for all four digits.
4. To cancel a process: Press
C
.
Information
If no input is received over a longer period of time (approx. 10 min), the con-
trols automatically returns to the status indication
S0
.
31
Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1
Non-Intrusive
Operation instructions
with actuator controls AUMATIC ACExC 01.1 Profibus DP
ENTER PASSWORD
0 * * *
:EDIT
¿
:OK C:ESC
OFF
S0
OPEN POSITION
E2
100%
M0
M0
OFF
S0
OPEN POSITION
E2
100%
