manualshive.com logo in svg

AUMA Aumatic ACExC 01.1, Руководство по эксплуатации

Поделиться
Скачать
AUMA Aumatic ACExC 01.1 Скачать руководство пользователя страница 6

1.3.

Warnings and notes

The following warnings draw special attention to safety-relevant procedures
in these operation instructions, each marked by the appropriate signal word
(DANGER, WARNING, CAUTION, NOTICE).

Indicates an imminently hazardous situation with a high level of risk.
Failure to observe this warning will result in death or serious injury.

Indicates a potentially hazardous situation with a medium level of risk.
Failure to observe this warning could result in death or serious injury.

Indicates a potentially hazardous situation with a low level of risk.
Failure to observe this warning may result in minor or moderate injury. May
also be used with property damage.

Potentially hazardous situation.
Failure to observe this warning may result in property damage. Is not used
for personal injury.

Arrangement and typographic structure of the warnings

Safety alert symbol

(warns of a potential personal injury hazard).

Signal word

(DANGER, WARNING, CAUTION, NOTE)

1.4.

Further references and symbols

The following references and symbols are used in these instructions:

Information

The term

Information

preceding the text indicates important notes and

information.

Symbol for CLOSED.

Symbol for OPEN.

Æ

Via the menu to parameter

Describes the path within the menu to the parameter. By using the push but-
tons of the local controls you may quickly find the desired parameter in the
display.

È

Description of the parameter settings/indications

Describes the setting/viewing possibilities of a parameter.

ò

Step by step

Provides a detailed description of each step for setting/viewing the parame-
ter.

6

Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1 Non-Intrusive

with actuator controls AUMATIC ACExC 01.1 Profibus DP

Operation instructions

Type of hazard and respective source!

Possible consequence(s) in case of non-observance (option)

Ò

Measures to avoid the danger

Ò

Further measure(s)

DANGER

CAUTION

WARNING

NOTICE

DANGER

Содержание Aumatic ACExC 01.1

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды