AUMA Aumatic ACExC 01.1 Скачать руководство пользователя страница 58

Страница: 58 / 88

10.2. Fault indications and warning indications

Faults

interrupt or prevent the electrical actuator operation.

Warnings

have no influence on the electrical actuator operation. They only

serve for information purposes.

Fault and warning indications are shown on the display.

10.2.1 Status display S0 - faults and warnings

Line 4 of status indication

shows faults and warnings.

Description of the fault indications:

FAULT IND.

A fault has occurred

For further information, press

and go to status indication

WARNING IND.

A warning has occurred

For further information, press

and go to status indication

FAULT + WARNING

Faults as well as warnings have occurred.

For further information, press

and go to status indications

(faults) or

(warnings).

NOT READY IND.

The actuator cannot be operated from REMOTE. The actuator can only be
operated via the local controls.

For further information, press

and go to status indication

(cause for fault indications).

FLT + NR

Faults and the

NOT READY IND.

signal have occurred.

For further information, press

and go to status indications

WRN + NR

Faults and the

NOT READY IND.

signal have occurred.

For further information, press

and go to status indications

FLT + WRN + NR

Faults, warnings, and the

NOT READY IND.

signal have occurred.

For further information, press

and go to status indications

Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1 Non-Intrusive

with actuator controls AUMATIC ACExC 01.1 Profibus DP

Operation instructions

LOCAL MODE

OPEN

100%

FAULT IND.

Содержание Aumatic ACExC 01.1

























































































Результаты поиска

Содержание Aumatic ACExC 01.1

Отзывы:

Бренды по названию

Популярные бренды

AUMA Aumatic ACExC 01.1, Руководство по эксплуатации

Результаты поиска

Содержание Aumatic ACExC 01.1

Отзывы:

Бренды по названию

Популярные бренды