Page
7.1.1
Status indication S0/S6 - operation
34
7.1.2
Status indication S4 - torque
35
7.2.
Indication lights/LEDs
36
7.3.
Mechanical position indicator/running indication (option)
36
8.
Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8.1.
Signals via fieldbus
37
8.2.
Feedback via output contacts (binary) - (option)
37
8.3.
Feedback signals (analogue) - (option)
37
9.
Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
9.1.
Type of seating: check/edit for end positions
39
9.2.
Torque switching: check/set
42
9.3.
Limit switching setting
45
9.4.
Bus address setting (slaveaddress)
48
9.5.
Test run
51
9.5.1
Rotational direction check
51
9.5.2
Limit switching check
52
9.6.
Switch compartment: open
53
9.7.
Mechanical position indicator setting (option)
53
9.8.
Gear stage of the reduction gearing: test/set
54
9.9.
Switch compartment: close
56
10.
Corrective action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
10.1.
Faults during commissioning
57
10.1.1
Mechanical position indicator
57
10.1.2
Fault in end position (overrun not considered)
57
10.1.3
Push buttons do not react
57
10.2.
Fault indications and warning indications
58
10.2.1
Status display S0 - faults and warnings
58
10.2.2
Status indication S1 - faults
59
10.2.3
Status indication S2 - warnings
60
10.2.4
Status indication S3 - causes for not ready remote
62
10.3.
Fuses
63
10.3.1
Fuses within the actuator controls
63
10.3.2
Motor protection (thermal monitoring)
64
11.
Servicing and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
11.1.
Preventive measures for servicing and safe operation
65
11.2.
Disconnection from the mains
66
11.3.
Maintenance
67
11.4.
Disposal and recycling
68
12.
Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
12.1.
Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1
70
12.2.
Controls ACExC 01.1 with ex-plug/socket connector with terminal board (KP, KPH)
72
12.3.
Controls ACExC 01.1 with ex-plug-in terminal connection (KES)
74
13.
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
14.
Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
14.1.
Declaration of Conformity and Declaration of Incorporation
81
14.2.
PTB certificate
82
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
3
Multi-turn actuator SAExC 07.1 – SAExC 16.1/SARExC 07.1 – SARExC 16.1
Non-Intrusive
Operation instructions
with actuator controls AUMATIC ACExC 01.1 Profibus DP
