manualshive.com logo in svg

AudioCodes Mediant 800 MSBG, Руководство пользователя

Аудио коды Mediant 800 MSBG - мощное устройство для VoIP коммуникаций. Вы можете бесплатно скачать пользовательское руководство на русском языке на нашем сайте. Получите полезную информацию о настройках и функциях этого продукта, чтобы максимально эффективно использовать его в своих целях.

Поделиться
Скачать
background image

Version 6.2 

705 

February 2011 

SIP User's Manual 

 

12. Configuration Parameters Reference 

 

Parameter 

Description 

ƒ

 

[2] 

No Reply = Call forwarding no reply 

ƒ

 

[9] 

DTE Out of Order = Call forwarding DTE out of order 

ƒ

 

[10] 

Deflection = Call deflection 

ƒ

 

[15] 

Systematic/Unconditional = Call forward  unconditional 

Web: Use Tgrp Information 
EMS: Use SIP Tgrp 

[UseSIPTgrp]

 

Determines whether the SIP 'tgrp' parameter is used. This SIP 
parameter specifies the Hunt Group to which the call belongs (according 
to RFC 4904). For example, the SIP message below indicates that the 
call belongs to Hunt Group ID 1:  
INVITE sip::+16305550100;tgrp=1;trunk-
[email protected];user=phone SIP/2.0 

ƒ

 

[0]

 Disable (default) = The 'tgrp' parameter isn't used. 

ƒ

 

[1] 

Send Only = The Hunt Group number is added to the 'tgrp' 

parameter value in the Contact header of outgoing SIP messages. If 
a Hunt Group number is not associated with the call, the 'tgrp' 
parameter isn't included. If a 'tgrp' value is specified in incoming 
messages, it is ignored. 

ƒ

 

[2]

 Send and Receive = The functionality of outgoing SIP messages 

is identical to the functionality described in option 1. In addition, for 
incoming SIP INVITEs, if the Request-URI includes a 'tgrp' 
parameter, the device routes the call according to that value (if 
possible). The Contact header in the outgoing SIP INVITE (Tel-to-IP 
call) contains   “tgrp=<source trunk group ID>;trunk-
context=<gateway IP address>”. The <source trunk group ID> is the 
Hunt Group ID where incoming calls from Tel is received. For IP-Tel 
calls, the SIP 200 OK device's response contains “tgrp=<destination 
trunk group ID>;trunk-context=<gateway IP address>”. The 
<destination trunk group ID> is the Hunt Group ID used for outgoing 
Tel calls. The <gateway IP address> in “trunk-context” can be 
configured using the parameter SIPGatewayName. 

ƒ

 

[3] 

Hotline = Interworks the hotline "Off Hook Indicator" parameter 

between SIP and ISDN: 

9

 

For IP-to-ISDN calls: 
-  The device interworks the SIP tgrp=hotline parameter 
(received in INVITE) to ISDN Setup with the Off Hook Indicator 
IE of “Voice”, and “Speech” Bearer Capability IE. Note that the 
Off Hook Indicator IE is described in UCR 2008 specifications. 
-  The device interworks the SIP tgrp=hotline-ccdata parameter 
(received in INVITE) to ISDN Setup with an Off Hook Indicator IE 
of  “Data”, and with “Unrestricted 64k” Bearer Capability IE. The 
following is an example of the INVITE with tgrp=hotline-ccdata: 

INVITE sip:1234567;tgrp=hotline-ccdata;trunk-
[email protected]

 

9

 

For ISDN-to-IP calls: 
-  The device interworks ISDN Setup with an Off Hook Indicator 
of “Voice” to SIP INVITE with “tgrp=hotline;trunk-
context=dsn.mil” in the Contact header. 
-  The device interworks ISDN Setup with an Off Hook indicator 
of “Data” to SIP INVITE with “tgrp=hotline-ccdata;trunk-
context=dsn.mil” in the Contact header. 
-  If ISDN Setup does not contain an Off Hook Indicator IE and 
the Bearer Capability IE contains “Unrestricted 64k”, the 
outgoing INVITE includes “tgrp=ccdata;trunk-context=dsn.mil”. If 

Содержание Mediant 800 MSBG



























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Mediant 800 MSBG

Watts SentryPlus Alert User Manual preview
SentryPlus Alert
Бренд: Watts Страницы: 12
VBOX XTi4144 Quick Installation Manual preview
XTi4144
Бренд: VBOX Страницы: 3
Juniper SSG5 Getting Started Manual preview
SSG5
Бренд: Juniper Страницы: 2
ProSoft Technology PLX82-EIP-PNC User Manual preview
PLX82-EIP-PNC
Бренд: ProSoft Technology Страницы: 154
BAB TECHNOLOGIE DUODMX Series Manual preview
DUODMX Series
Бренд: BAB TECHNOLOGIE Страницы: 75
NETGEAR CG814W Reference Manual preview
CG814W
Бренд: NETGEAR Страницы: 163
Zenitel ICX 500 Mounting & Installation preview
ICX 500
Бренд: Zenitel Страницы: 14
ADF Web HD67F18-B2 Series User Manual preview
HD67F18-B2 Series
Бренд: ADF Web Страницы: 33
Motorola RG3000 User Manual preview
RG3000
Бренд: Motorola Страницы: 46
Motorola HH1620 Specifications preview
HH1620
Бренд: Motorola Страницы: 4
Motorola Netopia 7107-65 User Manual preview
Netopia 7107-65
Бренд: Motorola Страницы: 22
Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP Specifications preview
EASY START KIT HMEZ1000 - CELL PHONE SET UP
Бренд: Motorola Страницы: 2
Motorola Netopia 2200 Series Specification Sheet preview
Netopia 2200 Series
Бренд: Motorola Страницы: 5
Motorola Netopia 2247-62 Specification Sheet preview
Netopia 2247-62
Бренд: Motorola Страницы: 5
Motorola Netopia 3347-02 Datasheet preview
Netopia 3347-02
Бренд: Motorola Страницы: 3
Motorola Netopia 3347-02-ENT Datasheet preview
Netopia 3347-02-ENT
Бренд: Motorola Страницы: 3
Motorola Netopia 3387WG-VGx Datasheet preview
Netopia 3387WG-VGx
Бренд: Motorola Страницы: 3
Motorola Netopia 6150285-00-02 Important Safety Instructions preview
Netopia 6150285-00-02
Бренд: Motorola Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды