AudioCodes Mediant 800 MSBG, Руководство пользователя

Страница: 73 / 890

Version 6.2 73 February 2011
SIP User's Manual 3. Web-Based Management
3.3.1.6 Management Settings
The Management submenu includes the following:
„ WEB User Accounts item (see ''Configuring Web User Accounts'' on page 73 )
„ Web Security Settings item (see ''Configuring Web Security Settings'' on page 76 )
„ Telnet/SSH Settings item (see ''Configuring Telnet and SSH Settings'' on page 76 )
„ WEB & Telnet Access List item (see ''Configuring Web and Telnet Access List'' on
page
77 )
„ RADIUS Settings item (see ''Configuring RADIUS Settings'' on page 78 )
„ SNMP settings submenu (see ''SNMP Settings'' on page 78 )
3.3.1.6.1 Configuring Web User Accounts
To prevent unauthorized access to the Web interface, two Web user accounts are available
(primary and secondary) with assigned user name, password, and access level. When you
login to the Web interface, you are requested to provide the user name and password of
one of these Web user accounts. If the Web session is idle (i.e., no actions are performed)
for more than five minutes, the Web session expires and you are once again requested to
login with your user name and password. Up to five Web users can simultaneously open
(log in to) a session on the device's Web interface.
Each Web user account is composed of three attributes:
„ User name and password: enables access (login) to the Web interface.
„ Access level: determines the extent of the access (i.e., availability of pages and read
/ write privileges). The available access levels and their corresponding privileges are
listed in the table below:
Table 3-6: Web User Accounts Access Levels and Privileges
Access Level
Numeric
Representation*
Privileges
Security Administrator 200 Read / write privileges for all pages.
Administrator 100
read / write privileges for all pages except
security-related pages, which are read-only.
User Monitor 50
No access to security-related and file-loading
pages; read-only access to the other pages.
This read-only access level is typically applied to
the secondary Web user account.
No Access 0 No access to any page.
* The numeric representation of the access level is used only to define accounts in a RADIUS server
(the access level ranges from 1 to 255).