manualshive.com logo in svg

AudioCodes Mediant 800 MSBG, Руководство пользователя

Аудио коды Mediant 800 MSBG - мощное устройство для VoIP коммуникаций. Вы можете бесплатно скачать пользовательское руководство на русском языке на нашем сайте. Получите полезную информацию о настройках и функциях этого продукта, чтобы максимально эффективно использовать его в своих целях.

Поделиться
Скачать
background image

SIP User's Manual 

754 

Document #: LTRT-12804 

 

Mediant 800 MSBG 

 

Parameter 

Description 

  Unconditional  

>>   302 

  Others 

 

>>   302 

If the device receives a Request-URI that includes a 'target' and 
'cause' parameter, the 'target' is mapped to the Redirect phone 
number and the 'cause' is mapped to the Redirect number 
reason. 

Web/EMS: Line Transfer Mode 

[LineTransferMode]

 

Determines the call transfer method used by the device. 

ƒ

 

[0] 

None = IP (default). 

ƒ

 

[1] 

Blind = PBX blind transfer. After receiving a REFER 

message from the IP side, the FXO sends a hook-flash to 
the PBX, dials the digits (that are received in the Refer-To 
header), and then immediately drops the line (on-hook). The 
PBX performs the transfer internally. 

ƒ

 

[2] 

Semi Supervised = PBX Semi-Supervised transfer. After 

receiving a REFER message from the IP side, the FXO 
sends a hook-flash to the PBX, and then dials the digits (that 
are received in the Refer-To header). If no Busy or Reorder 
tones are detected (within approximately 2 seconds), the 
device completes the call transfer by releasing the line; 
otherwise, the transfer is cancelled, the device sends a SIP 
NOTIFY message with a failure reason in the NOTIFY body 
(such as 486 if busy tone detected), and generates an 
additional hook-flash towards the FXO line to restore 
connection to the original call. 

ƒ

 

[3] 

Supervised = PBX Supervised transfer. After receiving a 

REFER message from the IP side, the FXO sends a hook-
flash to the PBX, and then dials the digits (that are received 
in the Refer-To header). The FXO waits for connection of the 
transfer call and if speech is detected (e.g., "hello") within 
approximately 2 seconds, the device completes the call 
transfer by releasing the line; otherwise, the transfer is 
cancelled, the device sends a SIP NOTIFY message with a 
failure reason in the NOTIFY body (such as 486 if busy tone 
detected) and generates an additional hook-flash towards 
the FXO line to restore connection to the original call. 

Message Waiting Indication (MWI) Parameters

 

Web: MWI Off Digit Pattern 
EMS: MWI Off Code 

[MWIOffCode]

 

Determines the digit code used by the device to notify the PBX 
that there aren't any messages waiting for a specific extension. 
This code is added as prefix to the dialed number. 
The valid range is a 25-character string. 

Web: MWI On Digit Pattern 
EMS: MWI On Code 

[MWIOnCode]

 

Determines the digit code used by the device to notify the PBX 
of messages waiting for a specific extension. This code is added 
as prefix to the dialed number. 
The valid range is a 25-character string. 

Web: MWI Suffix Pattern 
EMS: MWI Suffix Code 

[MWISuffixCode]

 

Determines the digit code used by the device as a suffix for 
'MWI On Digit Pattern' and 'MWI Off Digit Pattern'. This suffix is 
added to the generated DTMF string after the extension 
number.  
The valid range is a 25-character string. 

Содержание Mediant 800 MSBG



























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Mediant 800 MSBG

Net2Phone Max 410 Quick Start Manual preview
Max 410
Бренд: Net2Phone Страницы: 23
Rath 2100-LTEVER4 Installation & Operation Manual preview
2100-LTEVER4
Бренд: Rath Страницы: 9
Monitor SiloTrack CLOUD Installation And Operation Manual preview
SiloTrack CLOUD
Бренд: Monitor Страницы: 10
Moxa Technologies AIG-100 Series Quick Installation Manual preview
AIG-100 Series
Бренд: Moxa Technologies Страницы: 7
Actility ThingPark Partner Installation Manual preview
ThingPark Partner
Бренд: Actility Страницы: 4
SolarEdge SE1000 Installation Manual preview
SE1000
Бренд: SolarEdge Страницы: 49
SonicWALL ex9000 Upgrade Manual preview
ex9000
Бренд: SonicWALL Страницы: 7
Allied Telesis AT-iMG626MOD Datasheet preview
AT-iMG626MOD
Бренд: Allied Telesis Страницы: 3
QEI ePAQ-9400 User Manual preview
ePAQ-9400
Бренд: QEI Страницы: 43
QEI ePAQ-9410 User Manual preview
ePAQ-9410
Бренд: QEI Страницы: 48
QEI DIO-9110 User Manual preview
DIO-9110
Бренд: QEI Страницы: 45
Watchguard Firebox X1250E Hardware Manual preview
Firebox X1250E
Бренд: Watchguard Страницы: 32
ActionTec GT704WGB User Manual preview
GT704WGB
Бренд: ActionTec Страницы: 73
ViewSonic WPG-350 Software Installation Manual preview
WPG-350
Бренд: ViewSonic Страницы: 6
Weinzierl 5193 Operation And Installation Manual preview
5193
Бренд: Weinzierl Страницы: 10
FP FP S-OTGuard Seires Installation Instructions preview
FP S-OTGuard Seires
Бренд: FP Страницы: 2
Avaya Media Gateway G250 Administration Manual preview
Media Gateway G250
Бренд: Avaya Страницы: 840
KBR multimax D4-IGW-1 User Manual Technical Parameters preview
multimax D4-IGW-1
Бренд: KBR Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды