manualshive.com logo in svg

AudioCodes Mediant 800 MSBG, Руководство пользователя

Аудио коды Mediant 800 MSBG - мощное устройство для VoIP коммуникаций. Вы можете бесплатно скачать пользовательское руководство на русском языке на нашем сайте. Получите полезную информацию о настройках и функциях этого продукта, чтобы максимально эффективно использовать его в своих целях.

Поделиться
Скачать
background image

Version 6.2 

723 

February 2011 

SIP User's Manual 

 

12. Configuration Parameters Reference 

 

Parameter 

Description 

ƒ

 

Each coder type can appear only once per Coder Group. 

ƒ

 

Only the packetization time of the first coder in the defined coder 
list is declared in INVITE/200 OK SDP, even if multiple coders are 
defined. 

ƒ

 

The device always uses the packetization time requested by the 
remote side for sending RTP packets. If not specified, the 
packetization time is assigned the default value. 

ƒ

 

The value of several fields is hard-coded according to common 
standards (e.g., payload type of G.711 U-law is always 0). Other 
values can be set dynamically. If no value is specified for a 
dynamic field, a default value is assigned. If a value is specified 
for a hard-coded field, the value is ignored. 

ƒ

 

If silence suppression is not defined for a specific coder, the value 
defined by the parameter EnableSilenceCompression is used. 

ƒ

 

If G.729 is selected and silence suppression is enabled (for this 
coder), the device includes the string 'annexb=no' in the SDP of 
the relevant SIP messages. If silence suppression is set to 
'Enable w/o Adaptations', 'annexb=yes' is included. An exception 
is when the remote device is a Cisco gateway 
(IsCiscoSCEMode). 

ƒ

 

The coder G.722 provides Packet Loss Concealment (PLC) 
capabilities, ensuring higher voice quality. 

ƒ

 

A Coder Group can be assigned to an IP Profile (using the 
IPProfile parameter) and/or to a Tel Profile (using the TelProfile 
parameter). 

ƒ

 

For an explanation on V.152 support (and implementation of T.38 
and VBD coders), see ''V.152 Support'' on page 

452

. 

ƒ

 

For a description of using 

ini 

file table parameters, see 

''Configuring ini File Table Parameters'' on page 

368

. 

Web: IP Profile Settings Table

 

EMS: Protocol Definition > IP Profile

 

[IPProfile]

 

This 

ini 

file table parameter configures the IP Profile table. Each IP 

Profile ID includes a set of parameters (which are typically 
configured separately using their individual "global" parameters). You 
can later assign these IP Profiles to outbound IP routing rules (Prefix 
parameter), inbound IP routing rules (PSTNPrefix parameter), and IP 
Groups (IPGroup parameter). 

The format of this parameter is as follows: 
[IPProfile] 
FORMAT IpProfile_Index = IpProfile_ProfileName, 
IpProfile_IpPreference, IpProfile_CodersGroupID, 
IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay, 
IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, 
IpProfile_SigIPDiffServ, IpProfile_SCE, 
IpProfile_RTPRedundancyDepth, IpProfile_RemoteBaseUDPPort, 
IpProfile_CNGmode, IpProfile_VxxTransportType, 
IpProfile_NSEMode, IpProfile_IsDTMFUsed, 
IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia, 
IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller, 
IpProfile_CopyDest2RedirectNumber, 
IpProfile_MediaSecurityBehaviour, IpProfile_CallLimit, 

Содержание Mediant 800 MSBG



























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Mediant 800 MSBG

Quark-Elec QK-A032 Setup Manual preview
QK-A032
Бренд: Quark-Elec Страницы: 2
Zero 88 Betapack 4 Manual preview
Betapack 4
Бренд: Zero 88 Страницы: 16
HALNy HLE-3GM Quick Installation Manual preview
HLE-3GM
Бренд: HALNy Страницы: 8
nedis WIFIZBT10CWT Manual preview
WIFIZBT10CWT
Бренд: nedis Страницы: 44
Ursalink UG87-In Quick Start Manual preview
UG87-In
Бренд: Ursalink Страницы: 23
Nitgen Fingkey Access User Manual preview
Fingkey Access
Бренд: Nitgen Страницы: 36
ProLinx 6201-WA-DFNT to DFNT Setup Manual preview
6201-WA-DFNT to DFNT
Бренд: ProLinx Страницы: 45
BEC Ultimum 8900AX Quick Start Manual preview
Ultimum 8900AX
Бренд: BEC Страницы: 14
NKE Hub'O Getting Started preview
Hub'O
Бренд: NKE Страницы: 14
Soyal AR-727 Manual preview
AR-727
Бренд: Soyal Страницы: 4
HMS Ixxat SG-gateway Startup Manual preview
Ixxat SG-gateway
Бренд: HMS Страницы: 14
ETC Response SMPTE Setup Manual preview
Response SMPTE
Бренд: ETC Страницы: 5
Gardena SmartSystem Quick Start Manual preview
SmartSystem
Бренд: Gardena Страницы: 2
BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard User Manual preview
Lucent Technologies Access Security Gateway Guard
Бренд: BELL LABS INNOVATIONS Страницы: 266
Cambium Networks PTP 650 Series User Manual preview
PTP 650 Series
Бренд: Cambium Networks Страницы: 395
ZyXEL Communications AMG1202-T10B Specifications preview
AMG1202-T10B
Бренд: ZyXEL Communications Страницы: 2
IDTECK iPass IP100R Quick Installation Manual preview
iPass IP100R
Бренд: IDTECK Страницы: 21
R9 Technology G200 Manual preview
G200
Бренд: R9 Technology Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды