manualshive.com logo in svg

AudioCodes Mediant 800 MSBG, Руководство пользователя

Аудио коды Mediant 800 MSBG - мощное устройство для VoIP коммуникаций. Вы можете бесплатно скачать пользовательское руководство на русском языке на нашем сайте. Получите полезную информацию о настройках и функциях этого продукта, чтобы максимально эффективно использовать его в своих целях.

Поделиться
Скачать
background image

SIP User's Manual 

694 

Document #: LTRT-12804 

 

Mediant 800 MSBG 

 

Parameter 

Description 

Web: Set Out-Of-Service On 
Registration Failure 
EMS: Set OOS On Registration Fail 

[OOSOnRegistrationFail]

 

Enables setting an endpoint, trunk, or the entire device (i.e., all 
endpoints) to out-of-service if registration fails. 

ƒ

 

[0]

 Disable (default) 

ƒ

 

[1]

 Enable 

If the registration is per endpoint (i.e., AuthenticationMode is 
set to 0) or per Account (see ''Configuring Hunt Group 
Settings'' on page 

148

) and a specific endpoint/Account 

registration fails (SIP 4xx or no response), then that endpoint is 
set to out-of-service until a success response is received in a 
subsequent registration request. When the registration is per 
the entire device (i.e., AuthenticationMode is set to 1) and 
registration fails, all endpoints are set to out-of-service. If all the 
Accounts of a specific Hunt Group fail registration and if the 
Hunt Group comprises a complete trunk, then the entire trunk 
is set to out-of-service.  

Note:

 Te out-of-service method is configured using the 

parameter FXSOOSBehavior. 

[UnregistrationMode]

 

Determines whether the device performs an explicit unregister. 

ƒ

 

[0]

 Disable (default) 

ƒ

 

[1]

 Enable = The device sends an asterisk ("*") value in the 

SIP Contact header, instructing the Registrar server to 
remove all previous registration bindings. 

When enabled, the device removes SIP User Agent (UA) 
registration bindings in a Registrar, according to RFC 3261. 
Registrations are soft state and expire unless refreshed, but 
they can also be explicitly removed. A client can attempt to 
influence the expiration interval selected by the Registrar. A UA 
requests the immediate removal of a binding by specifying an 
expiration interval of "0" for that contact address in a 
REGISTER request. UA's should support this mechanism so 
that bindings can be removed before their expiration interval 
has passed. Use of the "*" Contact header field value allows a 
registering UA to remove all bindings associated with an 
address-of-record (AOR) without knowing their precise values. 

Note:

 The REGISTER-specific Contact header field value of "*" 

applies to all registrations, but it can only be used if the Expires 
header field is present with a value of "0".  

Web/EMS: Add Empty Authorization 
Header 

[EmptyAuthorizationHeader]

 

Determines whether the SIP Authorization header is included 
in initial registration (REGISTER) requests sent by the device. 

ƒ

 

[0]

 Disable (default) 

ƒ

 

[1]

 Enable 

The Authorization header carries the credentials of a user 
agent (UA) in a request to a server. The sent REGISTER 
message populates the Authorization header with the following 
parameters: 

ƒ

 

username - set to the value of the private user identity 

ƒ

 

realm - set to the domain name of the home network 

ƒ

 

uri - set to the SIP URI of the domain name of the home 
network 

ƒ

 

nonce - set to an empty value 

Содержание Mediant 800 MSBG



























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Mediant 800 MSBG

Synway SMG1002-2S Installation Manual preview
SMG1002-2S
Бренд: Synway Страницы: 7
Nitgen Fingkey Access User Manual preview
Fingkey Access
Бренд: Nitgen Страницы: 36
Comtrend Corporation CT-820C User Manual preview
CT-820C
Бренд: Comtrend Corporation Страницы: 84
Opengear ACM7004-2-LMA Quick Start Manual preview
ACM7004-2-LMA
Бренд: Opengear Страницы: 4
LANSITEC 100-13248 Manual preview
100-13248
Бренд: LANSITEC Страницы: 25
Motorola SURFBOARD SBG1000 White Paper preview
SURFBOARD SBG1000
Бренд: Motorola Страницы: 8
Motorola SURFBOARD SBG1000 Quick Installation Manual preview
SURFBOARD SBG1000
Бренд: Motorola Страницы: 16
Motorola SBG6580 Series Brochure & Specs preview
SBG6580 Series
Бренд: Motorola Страницы: 9
Motorola SURFboard SVG7782 User Manual preview
SURFboard SVG7782
Бренд: Motorola Страницы: 40
Motorola SURFBOARD SBG1000 Specifications preview
SURFBOARD SBG1000
Бренд: Motorola Страницы: 2
Motorola VT2442 - VONAGE Quick Start Manual preview
VT2442 - VONAGE
Бренд: Motorola Страницы: 12
Motorola vt2400 Quick Installation Manual preview
vt2400
Бренд: Motorola Страницы: 2
Motorola SBG-940 Quick Installation Manual preview
SBG-940
Бренд: Motorola Страницы: 15
Motorola VT2000 Specifications preview
VT2000
Бренд: Motorola Страницы: 2
Motorola vt2400 User Manual preview
vt2400
Бренд: Motorola Страницы: 84
Motorola SURFboard 574823-001-a Install Sheet preview
SURFboard 574823-001-a
Бренд: Motorola Страницы: 2
Motorola VT2400 ADVANCED VOICE GATEWAY - SOFTWARE LICENSE WARRANTY Manual preview
VT2400 ADVANCED VOICE GATEWAY - SOFTWARE LICENSE WARRANTY
Бренд: Motorola Страницы: 4
Motorola RSG2500 User Manual preview
RSG2500
Бренд: Motorola Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды