Audi Q5 2008, Руководство по ремонту

Страница: 59 / 197

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2 Transmission, Removing and Instal‐
ling
⇒ “2.1 Transmission, Removing”, page 55
⇒ “2.2 Transmission, Installing”, page 95
⇒ “2.3 Transmission Tightening Specifications”, page 102
2.1 Transmission, Removing
⇒ “2.1.1 Transmission, Removing, Vehicles with 2.0L TFSI En‐
gine Generation II”, page 55
⇒ “2.1.2 Transmission, Removing, Vehicles with 2.0L TFSI En‐
gine Generation III”, page 63
⇒ “2.1.3 Transmission, Removing, Vehicles with 3.0L TFSI En‐
gine”, page 71
⇒ “2.1.5 Transmission, Removing, Vehicles with 3.0L TDI En‐
gine”, page 89
2.1.1 Transmission, Removing, Vehicles with
2.0L TFSI Engine Generation II
Special tools and workshop equipment required
♦ Engine Support Bridge - 10-222A-
♦ Pry lever - 80-200-
♦ Engine and Gearbox Jack - VAS6931-
♦ Used Oil Collection and Extraction Unit - VAG1782-
♦ Engine Bung Set - VAS6122-
♦ Counterhold - Vibration Damper - T10355-
♦ Gearbox Support - T40173-
Preparing the -T40173- :
– The bracket -1- must be turned so that the shorter side faces
up as illustrated.
– The bracket -2- must be turned so that the longer side faces
up as illustrated.
– The bracket -3- must be turned so that the shorter side faces
up as illustrated.
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
2. Transmission, Removing and Installing
55