Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.1.3
Transmission, Removing, Vehicles with
3.0L TFSI Engine
Special tools and workshop equipment required
♦ Pry lever - 80-200-
♦ Engine and Gearbox Jack - VAS6931-
♦ Engine Bung Set - VAS6122-
♦ Tensioning Strap - T10038-
♦ Crankshaft Socket - T40058-
♦ Gearbox Support - T40173-
Preparing the -T40173- :
– The bracket attached to -1- must be removed.
– The bracket -2- must be turned so that the longer side faces
up as illustrated.
Removing
– Position the front wheels so they are straight.
Caution
Risk of damaging electronic components when disconnecting
the battery.
♦ Complete the steps for disconnecting the battery.
– Disconnect the battery Ground (GND) cable -2-. Refer to ⇒
Electrical Equipment; Rep. Gr. 27 ; Battery; Battery, Discon‐
necting and Connecting .
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
2. Transmission, Removing and Installing
71
