Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Fold the selector lever boot -1- upward and over the selector
lever handle -2-.
– Open the clamps -arrow- and remove the selector lever handle
along with the selector lever boot, without pressing the locking
button.
Installing
Note
♦
In order to install the selector lever handle, the locking button
must be pulled out all the way and secured either with a cable
tie -arrow- or with the assembly tool supplied with a new han‐
dle.
♦
Do not use mechanical aids or tools to remove the locking
button from the selector lever handle if the locking button was
unintentionally left unsecured. Position the compressed air
gun under the handle and press the locking button out with
compressed air.
– Place the new clamp -arrow- on the selector lever handle.
– Install the shifter lever handle completely on the shifter lever.
The lock button faces toward the driver.
• The handle must lock into the selector lever ring groove.
– Remove cable ties or assembly tools. The locking button
mechanism will engage in the vertical groove on the selector
lever. If necessary, press the locking button into the selector
lever handle.
– Move the button mechanism through “R” and “S” to perform
the function test.
• If the selector lever positions cannot be reached, remove the
handle again
⇒ “1.8 Selector Lever Handle, Removing and Installing”, page
.
– Secure the selector lever handle -2- to the selector lever with
the clamp -arrow-. Use -VAG1275- .
– Install the selector lever boot frame -1- to the center console.
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
1. Selector Mechanism
35
