Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Raise the transmission and tighten the tunnel crossmember
bolts -arrows-. Refer to
⇒ “3.1 Overview - Subframe Mount”, page 104
.
– Loosen the tensioning strap and guide the -VAG1383A- with
the -T40173- under the transmission.
Note
The following step is necessary to make sure the torque converter
rests on the drive plate evenly and is not tilted.
– Press the torque converter -2- against the drive plate -3- slight‐
ly in direction of -arrow- using an assembly lever -1-.
– Turn the crankshaft on the vibration damper 360° in the direc‐
tion of engine rotation.
Vehicles with a 2.0L TFSI Engine
Vehicles with 6-Cylinder TDI Engine
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
2. Transmission, Removing and Installing
99
