Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the bolts from the ATF pan in the sequence
-12 through 1-.
– Remove the ATF oil pan.
Installing
Install in reverse order of removal. Note the following:
Note
♦
Replaced the bolts and the gasket for the ATF pan.
♦
With high mileage vehicles, replace the ATF strainer when the
ATF pan is removed. Refer to
. Otherwise the ATF
strainer must be replaced only if it is damaged.
– Clean both magnets -arrows-. Make sure the magnets com‐
pletely contact the depressions in the ATF filter.
– Clean the sealing surface from all sealant residue.
– Make sure the ATF filter is mounted correctly on the Mecha‐
tronic otherwise it will not be possible to mount the ATF pan
so that it contacts the surface completely.
♦ The collar -1- on the ATF filter must be installed all the way
into the opening -2- in the Mechatronic.
♦ The mount -4- on the back must fit into the bolt -3- on the Me‐
chatronic.
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
142
Rep. Gr.38 - Gears, Control
