Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove the left flange shaft. Refer to
⇒ “4.1 Left Flange Shaft, Removing and Installing”,
.
– Remove shaft seal.
Note
The extractor lever must be positioned behind both sealing lips
on the shaft seal. Do not position at outer circumference of shaft
seal, otherwise the contact surface in transmission housing will
be damaged. Guide the release lever carefully while prying out.
– Examine shaft seal seat in transmission housing for damage;
if necessary rework.
– Coat the outer circumference and sealing lip of shaft seal with
axle oil.
Note
Push shaft seal onto pressure piece so that the projecting sealing
lip of seal faces the tool.
– Drive on in new shaft seal as far as stop.
– Insert the shim -2- and the outer race for the differential ta‐
pered roller bearing -1- into the transmission housing by hand
as far as the stop.
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
3. Seals
169