Asentria Teleboss 850, Руководство пользователя

Страница: 17 / 223

TeleBoss 850 2.06.280_STD User Manual
Page 11
Back Panel configuration
Over the course of its lifetime, the T850 has had three hardware versions, known as Rev B, Rev D, and the current
version, Rev F. The main visually identifiable difference between each version is the sensor port. Briefly, here are
the differences:
Rev B
– There is no sensor port
Rev D
– The sensor port is a 9-pin Mini DIN connector port
Rev F
– The sensor port is an RJ45 connector port
The type of sensor port determines what type of Asentria sensors will work with the unit. A complete description and
explanation can be found in the
T850 Hardware Revisions, Sensor Ports and Sensors section of this manual.
The current hardware revsion is Rev F (noted on the serial number label as H/W Rev: F.1)
Fig 4: T850 Rev F Back Panel configurations
The above drawings show the -2 and -6 models of the T850. Not shown is the -0 model which is configured
exactly like these two models except it does not feature any expansion slots, nor the bay for the optional battery
or -48VDC power.
Ports
Memory I/O
The slot labeled Memory I/O can be used for the optional external Temperature Sensor, which is a small MMC.
Eventually T850’s may also be upgraded using a MultiMedia Card (MMC) in this slot.
Sensor
The sensor port is an RJ45 connector for use with Asentria EventSensors and SensorJack sensors.
Ethernet
The Ethernet 10/100Mb interfaces are standard RJ45. Either of these standard connectors will connect the T850 to
an Ethernet hub or switch. Refer to the
Telnet/TCP Connections section in the Features chapter for further
information regarding a number of different types of Telnet connection options. LEDs by each Ethernet connection on
the back panel flicker when packets are being transmitted/received on that port.