Asentria Teleboss 850, Руководство пользователя

Страница: 68 / 223

TeleBoss 850 2.06.280_STD User Manual
Page 62
Status Keys
Status Keys are read-only keys that can be read using the command
SK [KEY] . The current value of the key will be
displayed.
Other commands to obtain a dump of all current Status Key values are:
sk get x status to start an Xmodem download of the Status Key file
sk get a status to start an ASCII download of the Status Key file
sk g status to start an ASCII download of the Status Key file
sk ? to start an ASCII download of the Status Key file
Or, you can log into the FTP server and issue the “
get skstatus
” command.
The table below lists the general Status Keys available on the T850. Other Status Keys that apply to specific
hardware (wireless modem, GPS) are defined in those sections of this manual.
Status Key syntax Values Description
event.mgmt.count
Non-negative
integer Returns the number of events currently under
management in the unit. It is the combined size
of the RAM and flash queues of events. Upon
generation, events go into the flash queue unless
there is space in the RAM queue. Only when the
events are in the RAM queue can their
respective actions be processed. Events are
moved from the flash queue to the RAM queue
as soon as RAM queue space becomes
available.
event.sensor[x].cc[y].value
,
where x is the EventSensor number and
y is the contact closure number
0 to 3600 Returns 0 for contact closure open, and 1 for
contact closure closed.
event.sensor[x].relay[y].value
, where x is the EventSensor number
and y is the relay number
0 to 3600 Returns 0 (inactive, de-energized) or 1 (active,
energized).
net.dsl.error
String Returns what errors (if any) were detected with
the DSL interface configuration after the unit was
commanded to try and use the DSL interface and
the configuration was detected to be invalid.
net.dsl.info.isp.discreason
String Returns why, if available, DSL connectivity was
lost.
net.dsl.info.isp.ip
Dotted quad Returns what IP address the DSL interface is
using with the ISP.
net.dsl.info.isp.linktime
String Returns how long the unit has been connected to
the ISP since the connection was started.
net.dsl.info.isp.status
Connected,
Not
connected
Returns whether the unit is connected to the ISP;
it returns "Connected" or "Not Connected".
Another key that gives the same information in a
different format is:
net.dsl.status
.
net.dsl.info.link
Connected,
Not
connected Returns whether the unit is connected to the ISP;
it returns "Connected" or "Not Connected".
Another key that gives the same information in a
different format is:
net.dsl.info.isp.status
net.dsl.info.speed
String Returns the speed of the link (provided there is
DSL connectivity, as shown with
net.dsl.info.link
).