Amcrest NV21 Series, Руководство пользователя

Страница: 236 / 277

236

The default user amount is 64 and the default group amount is 20. The factory
default settings include two levels: user and admin. You can set the corresponding
group and then set the rights for the respective user in the specified groups.

User management adopts group/user modes. The user name and the group name
must be unique. A user can only be included in one group.
5.9.5.2.1 User name
In this interface you can add/remove users and modify user names. See Figure 5-89.
Figure 5-89
Add user: This is to add a user to a group and set the user’s rights. See Figure 5 -89.
There are t wo default users: admin and the hidden user “default”. All users have administrator
rights. The hidden user “default” is for system interior use only and cannot be deleted. When there
is no user logged in, the hidden user “default” automatically logs in. Y ou can set some rights such as
monitor for this user so that you can view some channel views without logging in.
Here you can input the user name and password and then select one group for the current user.
Please note the user’s rights should not exceed the group’s rights.
For a convenient setup, please make sure the general user has lower rights than the admin.