Allied Telesis AT-SB*81CFC960, Руководство по установке

Страница: 28 / 356

Chapter 1: Chassis and Power Supplies
28 Section I: Hardware Overview
chassis.
 The AT-SBxPWRSYS2 AC System Power Supply was added to
the management software in release 5.4.5-1. It will work with
earlier releases, but Allied Telesis recommends updating the
software on controller cards with previous versions to the latest
release to ensure full compatibility.
Note
The AT-SBxPWRSYS1 DC Power Supply is not compatible with the
other system and PoE power supplies and should not be used in the
same chassis with other power supplies. You may, however,
operate the chassis for a short period of time with AC and DC power
supplies if you are converting it from one type of power supply to
another, such as from AC to DC. This allows you to transition the
chassis without having to power it off.
Slots A and B are for the AT-SBxPWRPOE1 AC Power Supply. The
module provides power for the PoE feature on the twisted pair ports on the
AT-SBx81GP24 Line Card. For more information, refer to “Power over
Ethernet on the AT-SBx81GP24 Line Card” on page 68. Please review the
following items concerning the PoE power supply:
 You may install either one or two PoE power supplies in the
chassis.
 PoE power supplies are installed in slots A and B of the chassis.
 If you are installing only one power supply, you may install it in
either slot A or B.
 A single PoE power supply provides up to 1200 watts of power for
PoE. Two PoE power supplies provide up to 2400 watts of power.
 The PoE power supply is hot swappable. You do not have to power
off the chassis to install or replace it.

The total number of powered devices the chassis can support on
the ports on AT-SBx81GP24 PoE Line Cards depends on the
number of AT-SBxPWRPOE1 Power Supplies in the chassis and
the power requirements of the devices. For instance, a chassis can
support 40 ports of Class 4, PoE+ (IEEE 802.3at) powered devices
with one power supply or 80 ports with two power supplies. For
further information, refer to “Power Budgeting” on page 69.
Note
Power supplies are not included with the chassis and must be
purchased separately.
LEDs
The LEDs on the AT-SBxPWRSYS1 and AT-SBxPWRSYS2 AC System
Power Supplies are described in Table 1 on page 29.