Airwell KXV Series, Инструкция по эксплуатации

Страница: 287 / 380

Engineering manual
287

Set point temperature (SPT) setting
Step Action Description Display
1
“Temp+” is pressed
when selected unit is
ON
Scroll up to select SPT:
16 – 17 – ….. – 29 – 30-Hi
16°C ->17°C ->…..->29°C ->30°C ->
Hi °C
2
“Temp-” is pressed
when selected unit is
ON
Scroll down to select SPT:
30 – 29 – ….. – 17 – 16-Lo
30°C ->29°C ->…..-> 17°C -> 16°C ->
Lo °C
3
“Temp+” or “Temp-”
is pressed when exceed
“SPT limiting”
User set temperature exceeds
allowed range
If SPT > upper limit, display “Hi °C” instead of
the SPT for 3s.
If SPT< lower limit, display “Lo °C” instead of
the SPT for 3s.
After 3 seconds, the high/low limit temperature
will be set and shown.

Fan speed setting
Step Action Description Display
1
“FAN” is pressed
when single group
is selected
Select operation mode:
High – Auto – Low – Medium
-> -> >
2
“FAN” is pressed in
Dry mode
Fan speed can only be Low Low fan ion is on

Feel function
# Action Description Display
1
Set DIP switch for I-feel to
ON
I-Feel setting No display
4 DIP switch set to OFF Exit and save I-Feel settings No display

Filter clean and reset
When icon is ON, it warns filter need clean.
Press filter clean reset button (“+” and “-”) together, will OFF.

HRV/fresh air
LWCS only shows the ON-OFF state of HRV or fresh air function by icon .