Airwell KXV Series, Инструкция по эксплуатации

Страница: 241 / 380

Engineering manual
241
(5) Minute setting: LED1 displays the setting day number, LED2~ 3 displays the setting hour, LED4~5 are blinking “00”
to indicate to set the minute.
(a) Press Up or Down button, LED 4~5 will scroll “00” to “59”.
(b) Press Set button to confirm the set.
Or Press Return button to exit the minute and come back to clock setting.
(6) Press Return button to exit to last level
2.4.6 ODU control mode setting
Operate steps
:
(1) Press Set button will let LED1~5 ( ) from blinking to ON and enter control mode setting.
(2) Press Mode button to enter next level.
(3) HMI displays the current control mode or default. Press Up or Down button to scroll from the current control mode
or default: → → →
(4) Press Set button to confirm the selection. Display for , , , is lit from
blinking, for , HMI will enter master IDU selection step.
(5) Master IDU selection:
(a) Press Mode button to enter next level. LED1~2 are blinking “uA”, LED3~5 are blinking “101”
(b) Press Up or Down button to let LED 3~5 scroll from “101” to “816”
(c) Press Set button to confirm the selection.
(6) Press Return button to return to last level.
2.4.7 Diagnostic
Operate steps:
(1) Press Set button when LED1- LED5 are blinking to entry Diagnostic,
(2) Press Mode button entry next level when is lit from blink.
(3) Press Up and Down button to scroll LED1~LED5 from
→ →
(4) Press Set button to confirm the select and LED1~LED5 display the selection.
(5) Press Mode button to entry next level;
(6) Press Up and Down button to scroll different level and malfunction codes “xx yy”, “xx” means malfunction level,
“yy” means the malfunction code. However, for :
(a) Press Mode button to entry next level when is lit.
(b) Press Up and Down button, LED1~5 scroll the IDU physic address of the IDU ( ) which has fault.