Airwell KXV Series, Инструкция по эксплуатации

Страница: 267 / 380

Engineering manual
267
Status
21 CDT1 {-30,130} {-30,130} ℃ 1
22 CDT2 {-30,130} {-30,130} ℃ 1
23 Sub-Cooling EEV {0,480} {0,480} Steps 1
24 SCIT {-30,70} {-30,70} ℃ 1
25 SCOT {-30,70} {-30,70} ℃ 1
26 CST 1 {-30,70} {-30,70}
℃
1
27 CST 2 {-30,70} {-30,70}
℃
1
(2) Indoor unit message list:
Message
code
Name Display content Actual Content Unit Precision
01 Physical ad {10 ， 8F} {16 ， 143} / /
02 Model
22,28,36,45,56,63,71,90,
110
7,9,12,15,18,21,
24,30,36,48
kBTU 1
03 IFAN speed {0,1600} {0,1600} Rpm 10
04 EEV {0,480} {0,480} Steps 1
05 ICIT {-30,100} {-30,100} ℃ 1
06 ICMT {-30,100} {-30,100} ℃ 1
07 ICOT {-30,100} {-30,100} ℃ 1
08 RAT {-30,100} {-30,100} ℃ 1
09 SPT {16,30} {16,30} ℃ 1
10 Reserved 00 00

Read/Write user address
 User address introduction
Normally, every indoor unit should have one physical address and one user address, physical address can’t be
changed like ID, but user address can be rewrite by this function.
(1) User address’s form is XYY, X is from 1 to 8, YY is from 01 to 16.
(2) There is only one “X” value in one R/C wiring.
(3) If LWC is in “unit number>16” fault or “Unit number=0” fault, LWC is in fault and LED will blink to
indicate that the function is inactive when press “Holiday” button.
(4) Enter the function by press “Holiday” button.
 Operation intruction
(1) After press “Holiday” button LWC enters Read/Write user address function, LCD display as: