Airwell KXV Series, Инструкция по эксплуатации

Страница: 286 / 380

Engineering manual
286

I-Feel function
Take the temperature which detected by LWCS sensor as the room temperature.
Every unit which is connected with LWCS will use the I-feel sensor as room temperature.
Note: This function is set by technician.

Window dry contact
It is used for energy saving and indicates whether the window is open or close.
Indoor unit and outdoor unit message display
Indoor unit and outdoor unit message can be checked by technician in TM.

Operation Indication LED
When group is ON, the LED is ON.
When group is off, LED is OFF.
LED blinks when a fault happens.

Fault Code
Indicates default in the place SPT.

Filter clean indication
Filter should be cleaned

Filter clean reset
Filter control restart for another cycle

Reset function
General reset. This function is only operated by technician.

Technician mode
This mode is only to be used by technician.
3.3.3 Main procedure setting

ON/OFF setting
Step Action Description Display
1 “ON” is pressed
Turn ON the
unit
SPT/Mode/fan speed icons and other setting features are
shown by LCD.
2 “OFF” is pressed
Turn OFF the
unit
Nothing displays in LCD.

Operation mode setting
Step Action Description Display
1
“MODE” is pressed if
single group is
selected
Select operation mode:
Cool – Heat (Only heat pump
system) – Dry – Fan – Auto
(Only HRS)
-> -> -> ->