Airwell KXV Series, Инструкция по эксплуатации

Страница: 261 / 380

Engineering manual
261
# Action Description LCD Display
14
“<” is pressed during setting
(In Day column, timer action
column, Timers Option
column, Timer’s Hour
column, Timer’s Minute
column)
Move back to the previous
column, without confirmation of
the setting.
Selected column is blinking.
15
“<” is pressed during setting
(In program column)
Exit schedule program setting
Pn and active action are displayed if the
program has copied to the selected group.
16
“Clear” is pressed.
(In Day column, timer action
column, Timers Option
column, Timer’s Hour
column, Timer’s Minute
column)
Cancel the timer setting.
Example: if in day column and
“clear” is pressed, the timer
actions for this day will be
cleared.
Selected column is blinking
17
“Clear” is pressed during
setting (In program column)
Cancel the Pn Existing days is gone.
18
“Program” is pressed again
in any step or no any
operation for 30 seconds
Exit program setting and save Pn.
After going out of programming,
the timer actions will
automatically be arranged by
chronologic hour order.
Pn and active action are displayed if the
program has copied to the selected group.
 How to copy the program to group
Action Description Display
1
“PROGRAM
” is
pressed
for 5
seconds
Start copy program
All of existing Pn are ON.
Note: User can’t enter program copy
setting if there isn’t program action
setting.
2
“<” Or “>” is
pressed
ALL-01 – 02 – 03 – … –
15 – 16 is scrolled.
Number of selected user address is
blinking for about 10s.
3
“

” or “

”
is pressed
P1 – P2 – P3 – P4 is
scrolled.
Selected program is blinking.
Underline of relevant group is ON
when the selected Pn has been
copied to the group.
4
“OK” is
pressed
If the program has been
copied to the selected
group, the program will be
cancelled from the group;
If the program has not
been copied to the
group, the program will
be copied to the group.
If the program is copied to the
group, above line of selected
user address is ON, the
program is blinking;
If the program is cancelled from
the group, above line of
selected user address is off, the
program is blinking.