Airwell KXV Series, Инструкция по эксплуатации

Страница: 240 / 380

Engineering manual
240

LED 1~5 are blinking when unit in force heating state and fault occur, “ ”is fault code. If no
faults occur, is displayed, is the compressor operating speed.

LED 1~5 are blinking when unit in normal cooling state and fault occur, “ ”is fault code. If no
faults occur, is displayed, is the compressor operating speed.

LED 1~5 are blinking when unit in normal heating state and fault occur, “ ”is fault code. If no
faults occur, is displayed, is the compressor operating speed.

Operate and display introduction:
(1) Press Mode button to entry the next level.
(2) Press Up or Down button, LED 1~5 will scroll:
→ → → →
(3) Press Set button to confirm the select state and entry this state.
(4) Press Return button will exit select state and come back to the last level
[3]
.
[3] However, for cancel , , should long press Return button for 5s.
2.4.5 Clock Setting
LED1 indicates the week day, from 1 to 7.
LED 2~3 indicates the hour, from 00 to 23;
LED 4~5 indicates the minute, from 00 to 59.
Operate steps:
(1) Press Set button will let LED 1~5 ( ) from blinking to ON and enter clock setting function.
(2) Press Mode button to enter next level. HMI shows the existing current time. And enter to week day setting.
(3)Week Day set: LED1 is blinking to indicate to set the week day. LED2~5 are ON.
(a) Press Up or Down button, LED 1 will scroll “1” to “7”.
(b) Press Set button to confirm the set and move to the hour setting.
Or press Return button to exit the day setting and come back to clock setting.
(4) Hour setting: LED1 displays the setting week day number, LED2~3 are blinking to indicate to set the hour, LED4~5
are ON..
(a) Press Up or Down button, LED 2~3 will scroll “00” to “23”.
(b) Press Set button to confirm the set and move to the minute setting.
Or press Return button to exit the hour and come back to clock setting.