Airwell KXV Series, Инструкция по эксплуатации

Страница: 258 / 380

Engineering manual
258

Comfort features setting
 Only in ON state, comfort features can be set; if selecting ALL, only when all group in ON state, comfort
features can be set.
 When in Comfort setting, all buttons (except COMFORT,>,
∧
and
∨
) are inactive.
 LCD display details:
Step Action Description Display
1
“COMFORT” is
pressed
Enter feature setting
All comfort icons are ON. Bar is ON if feature is
already ON. Selected feature icon (Default is
V-Louver) blinks.
2
“

” or “

” is
pressed
Select feature:
Vertical louver-Horizontal
louver – sleep – ION – ESF Selected feature icon blinks.
-> -> -> ->
3 “>” is pressed Set status of selected feature
V-louver: ->OFF-> -> -> -> ->
H-louver: ->OFF
Sleep: ->OFF
ION: ->OFF
ESF: ->OFF
4
Press COMFORT
again or no
operation for 30s
Exit and save feature setting
Enabled feature icons are ON. Bars and disabled
icons are OFF.

Note
:
For single group,
 If all units of the group have the function, when entering Comfort setting, icon for the relevant function should
be ON; if not all units have the function, icon for the relevant function is OFF.
 When entering Comfort setting, LWC shows the current features state by underline, when underline is ON, the
function is used now, otherwise the function is OFF.
For Control ALL,
 If all groups have the function, when entering Comfort setting, icon for the relevant function should be ON; if
not all groups have the function, icon for the relevant function is OFF.
 If all groups have the function and the function is in ON state, the underline will be ON for relevant function
icon; if all groups have the function but not all groups are turned ON, the underline will blink for relevant function
icon. However, for V-louver, if not all groups share the same angle setting, when enter Comfort setting, Auto icon
with blinking underline should be shown.
Selected icon blinks
Bar is lighting if feature has set