Airwell KXV Series, Инструкция по эксплуатации

Страница: 170 / 380

Engineering manual
170
5.6.3 Unit installation
A.
Unit installation

Insert 4 M10 or 3/8
”
threads rods into the ceiling.

Introduce the rods through the slots of unit suspension brackets.

Position the shock absorbers, add washers and screw the nuts until the unit is firmly supported.

In case of a gap between the unit and the ceiling, put a rubber or a neoprene sheet.
Important: The unit must be perfectly levelled.
B.
Holes Drilling location on the ceiling for indoor unit
Model A B
DSV018~DSV024 797 599
DSV030~DSV036 861 663
C.
Draining installation
For an efficient functioning of the drainage system please take care of the following:

Since the drainage basin bottom is sloppy, Alleyways balance the unit by the suspension brackets and not by the
drainage basin itself.

Always lay the drain with downward inclination 2%. Prevent any upward flow or reverse flow in any part.

Use 19 mm tube for drainage.
Chart 5-7
Chart 5-8