Airwell KXV Series, Инструкция по эксплуатации

Страница: 263 / 380

Engineering manual
263
 ON
ON button will let all groups turn on.
 OFF
OFF button will let all groups turn off.
 FAN
FAN button will let all groups share the same fan speed.
-If all groups share the same fan speed setting in initialization stage, the fan speed icon will be displayed. Press FAN will
start with this fan speed.
-If not all groups share the same fan speed, no fan speed icon is displayed in Control All. Press FAN will start with
-If any group is setting in Dry mode, then only low fan speed can be set in Control All.
 “+” or “–”
“+” or “–” button will let all groups share the same set point temperature.
-If all groups share the same SPT in initialization stage, the SPT number will be displayed, press + or – will start with
this displayed SPT.
-If not all groups share the same SPT, no SPT number is displayed in Control All. Press + or – will start with 24
℃
.
 MODE
MODE button will let all groups share the same mode setting.
-If all groups share the same mode setting in initialization stage, the mode icon will be displayed. Press MODE will start
with this displayed mode.
-If not all groups share the same mode setting, no mode icon is displayed in Control All, press MODE will start with
 COMFORT
COMFORT including Horizontal louver ( ), Vertical louver ( ), Sleep ( ), ION ( ) and ESF ( ).
-If all groups share the same selected feature setting, the under line of relevant icon will be lit, press “>” button will start
the setting with current state.
-If not all groups share the same selected feature’s setting, the under line of relevant icon will blink. If groups set
different Horizontal louver angle,
with blinking underline are shown by LWC. Then press “>” button will let all
groups share the same setting start with Auto ( ) for Horizontal louver, ON for Vertical louver, ON for Sleep, ON for
ION and ON for ESF.
 VENTILATION
VENTILATION button will let all HRV or Fresh Air share the same setting.
-If all groups share the same setting in initialization stage, the icon will display in Control ALL, press VENTILATION
button will let all HRV or Fresh Air start with the displayed icon.
-If not all groups share the same setting, no HRV or Fresh Air icon will be displayed, press VENTILATION will let all
HRV or Fresh Air share the same setting start with Fresh air high.
 PROGRAM
-If groups don’t share the same program, program icon will not display in Control ALL, and group runs itself program.
-Copy program in Control ALL will let all groups share same weekly program, and relevant program icon will display.

HOLIDAY
HOLIDAY let all groups run in holiday mode.
-Only all groups are in Holiday state, holiday icon will display in Control ALL.

Note:
Features’ setting in Control All is valid only when all groups are ON