Airwell KXV Series, Инструкция по эксплуатации

Страница: 242 / 380

Engineering manual
242
(7) Press Return button to last level.
2.5 Special test function
2.5.1 ITEST
There are two cases which need ITEST: when the whole system is newly installed and it’s powered on for the first time;
when you change a new ODU controller board or IDU controller board to the existing system.
Operating steps:
(1) Press Set button when LED 1~5 are blinking to enter installation test.
Or long press Mode button when system in INIT state.
(2) Long press Return button to stop the process and return to INIT process.
(3) If there is some fault during ITEST process as follow, the fault will indicated in HMI:
HMI display Full Description From
iAPAF Auto physical address failure
Master /slave
ODU
iAPAo Auto physical address over time
Master /slave
ODU
inqMS
IDU/SC/ODU’s quantities doesn’t match system
requirement
Master ODU
iiqoS
The IDUs belong same system are over system
requirement
Master/slave ODU
inqMb IDU/SC/ODU’s quantities is not as same as before Master ODU
iAUAF Auto user address failure Master ODU
itStF ITEST failure Slave ODU
orEGF ODU require IDU to register to it is failure All ODU
2.5.2 STEST
If the jumper for STEST is shorted when power on, it will enter STEST and LED1~5 are blinking .
For details, please find the attach document.