Airwell KXV Series, Инструкция по эксплуатации

Страница: 191 / 380

Engineering manual
191
6.6 Installation
6.6.1 Installation accessories
No. Accessories parts Qty.
1
Mounting plate
1
2
Air purifying filter(optional)
1
3
Screws,washer, dowels
4
4
Unit operation manual Installation manual
2
6.6.2 Select the best location
1. There should not be any heat source or steam near the unit.
2. There should not be any obstacles blocking the air circulation.
3. A place where air circulation in the room is good.
4. A place where drainage can be easily done.
5. A place where noise prevention is taken into consideration.
6. Do not install the unit near the door way. Ensure the spaces indicate by arrows from the wall, ceiling, fence or other
obstacles.
7. The appliance shall be installed over 2.3m high
6.6.3 How to fix installation plate

The mounting wall is strong and solid enough to prevent it from the vibration.

The edge of installation carton board should be at more than 50mm at right and left of the wall.
1. Locate the mounting plate on the wall in a horizontal position.
2. Mark the position of the four mounting holes on the wall and drill four holes to accommodate the dowels.
3. Mount the mounting plate on the wall by the four screws. Ensure screws are tightened properly.
4. The Piping hole is drilled at a 5 degree down-ward angle to prevent condensed or rain water from penetrating back
into the room.
5. Trim the hole in the wall with a
Ф 70mm commercial plastic tube.