27
Figure 17. “Fert, L. Rate Calibration” Screen.
4. During this process, the amount of fertilizer thrown by a pipe must be weighted using a precise scale. It is
recommended to take various samples and then average them out. Load this value in grams (
Figure 18
), using
the up arrows (
or
) or down arrows (
ó
), to increase or to decrease the value, respectively. Then,
the computer will calculate the value that corresponds to 10 rounds, exactly (
Figure 19
).
Figure 18. “Fert. L. Rate Calibration” process. Enter the average of grams thrown by fertilization pipes. The up arrows
increase the value of fertilizer L. grams, while the down arrows diminish it.
In the case of seed calibration, enter the number of seeds thrown by the seed pipe; DON’T enter the seed
weight.
