9
Planned Performance, stipulates the number of hectares that will be worked in an
hour if the speed value is maintained during the current job.
RPM, for every monitored shaft. This information is available only for the monitors
that have one or more RPM counting sensors installed.
Speed according GPS. It displays the calculated speed according to the
information sent by the satellites of the global positioning system.
If specific information in a box needs to be altered, press the corresponding key to that box and the
information will change according to the previous indicated order.
2.3. Mapping Status
At this place of the screen the selected plot number is displayed.
The icon
indicates that mapping is enabled. On its right shows the percentage of available space onto the SD
memory card where data is stored.
When mapping is disabled, the
symbol will be displayed. Here, there are two examples:
Selected plot: 2,
Mapping: enabled,
Available space on SD: 92%
Selected plot: 1,
Mapping: disabled,
Available space on SD: 96 %
On page 16 explains how to change plot and on page 18 explains how to enable or disable mapping.
2.4. GPS Status
The computer displays on the Job Screen is it is receiving information from GPS receiver.
GPS data reception
No GPS data reception
2.5. Job Screen Tabs
Pressing the keys on the left of the Job Screen the different tabs can be selected: Pipes, Chart o Rates (
Figure
2
,
Figure 3
y
Figure 4
, respectively), or option Menu can be selected to enter into Main Menu where the
computer is configurated (
Figure 6
).
2.5.1. “Pipes” Tab
Tab “Pipes” displays graphically the seed and fertilizer status in each row (
Figure 2
).
Planned Perf.
Ha/h
12.4
Sensor 1 RPM
rpm
1425
GPS Speed
km/h
8.3
