29
Figure 20. Screen to program manual rates. In the highlighted rate’s box are the limits that a product can achieve.
The blinking box shows what values are ready to be modified. (
Figure 20
shows rate Fert. L selection from the
first rate group). First, select the rate to be modified using the keys on the left hand side of the screen (
to
) and the arrow to the right
. Then, pressing the arrows up (
) and down (
)
the highlighted value will increase or decrease, respectively.
Once all the rate values have been programmed, select “OK”. The computer will then proceed to the job screen
with the Rate tab activated, ready to start working. (
Figure 21
).
Figure 21. Pre-programmed rate selection menu. The first rate memory is selected. The user can select other memorized
rate group pressing Rate key at any time.
