19
7.3. Plot reference
MENU > JOB REGISTER > REFERENCE
/
Plot reference is a brief alphanumerical description (letter and number) that can be used to name a plot.
(Example: Plot 1, Ref.: TERESITA). To change plot reference, use the up arrows
or down arrows
till
the desired number or letter appears. Then, press the arrows at the side to select another letter or number to be
modified.
7.4. Enable/Disable mapping of the job done.
Enter into “Mapping” option and configure the desired “Enabled” or “Disabled” option.
MENU > JOB REGISTER > MAPPING (Enabled / Disabled)
Before enabling mapping, check that the computer has been started with the SD card is into it
(otherwise, mapping file cannot be created). A GPS receiver must be connected also because
this one will provide positioning information on the plot.
7.5. Job reports
The computer will create a simple text file onto the SD card with job register data per plot. Thus, for plot 1,
REPORT1.TXT file will be created. This file can be displayed and modified in a PC.
7.6. Copy application maps and job reports onto the pen-drive
Select “Copy” option to copy, from SD memory card, all the mapping data (
PLOTnn.TXT
) and job reports
(
REPORTnn.TXT
) onto a pen-drive connected to a USB unit.
MENU > JOB REGISTER > COPY
JOB REPORT - AG FUSION
________________________________________
Plot 1 - TERESITA
Worked surface (Has.)........ 0.2
Worked Time (hours) ......... 0.1
Maximum Speed (Km/h) ........ 6.7
Seed density (S/m) .......... 12.5
Seed density (S/Ha) ......... 340.8
Linear Fertilizer (kg) ...... 0
Alongside Fertilizer (Kg) .. 0
VRA .......................... Automatic
Applied prescription ......... CORN_1
Additional comments:
