36
Error in internal EEPROM writing
This error is produced when the data cannot be loaded onto the computer’s internal memory, this is because of
a damage in the memory. If this error is repeated, is recommended to send the computer to our technical
department
Connected nodes do not coincide with the configured ones
This error occurs when any node connected to CAN branch was not configured in the computer.
It is suggested to check that each node has been configured correctly.
No numerical DBF field
The
.dbf
file’s field does not have a numerical format. It must contain 3 numerical fields (FERT. L, FERT. A
and SEEDS). Details on Page 30.
DBF field larger than 50
The
.dbf
file’s fields have a width too large. The width must not exceed 50 digits.
Seed Failure. Row…
Density Failure. Row…
Linear Fert Failure. Row…
Alongside Fert Failure. Row…
Shaft rotation failure…
Low level in hopper…
RPM Failure. Shaft…
Speed limit exceeded…
See these messages details in “Seed and fertilization monitoring” section, on Page 20)
