agrifac Condor C03 Скачать руководство пользователя страница 22

Страница: 22 / 250

SAFETY

Condor-UM-2011-21-R0-en-us-20210108

Label

Instruction

Order number

EXPLOSION HAZARD

Pressure accumulator contains high pressure gas and oil.

Prevent death or serious injury.

Replacing, pre-charging by qualified personnel only.
Do not weld near a pressure accumulator.
Do not release the pressure by loosening a fitting.

8461208

EJECTION HAZARD

Prevent death or serious injury.

Fasten your seat belt.

8461235

Seat belts are supplied

since 03-2014.

FALL HAZARD

Prevent death or serious injury.

Climbing on and off the machine:

•

Do not jump off the machine.

•

Move the ladder down before leaving the cab.

•

Face the ladder when climbing on and off.

•

Keep 3 points of contact with the ladder and the handrails:

2 hands and 1 foot, 1 hand and 2 feet.

•

Clean the ladder steps and the handrails if necessary.

•

Move the ladder up before driving off.

8461225

Working near power lines

ELECTROCUTION HAZARD

Prevent death or serious injury:

•

Know the height and vertical reach of the machine.

•

Determine a safe working procedure. Consult the power

company.

•

Do not unfold or fold the spray boom near power lines.

•

Keep a safe distance, electrocution can occur without di-

rect contact.

In case of direct contact:
1.  Stay in the cab.
2.  Do not let anyone go near the machine.
3.  Try to lower raised parts, try to drive away.
4.  Call the power company.
5.  Jump off the machine in case of fire: do not use the ladder.

8461237

WARNING

DANGER

Содержание Condor C03



























































































































































































































































Результаты поиска

Содержание Condor C03

Отзывы:

Похожие инструкции для Condor C03

Бренды по названию

Популярные бренды

agrifac Condor C03, Руководство пользователя

Результаты поиска

Содержание Condor C03

Отзывы:

Похожие инструкции для Condor C03

Бренды по названию

Популярные бренды