agrifac Condor C03, Руководство пользователя

Страница: 132 / 250

OPERATION
132
Condor-UM-2011-21-R0-en-us-20210108
5.25 Filling the spray tank (without the optional filling program)
Condor 5: in preparation
Condor 2, 3 and 4.
Many spray products require constant agitation of the spray liquid. Read and obey the
instructions on the label and in the documentation of the spray product. Let the spray
liquid circulate for 2 minutes through the spray boom before you start spraying.
Filling the spray tank with clean water (or with spray liquid prepared in advance):
1. Connect the suction hose.
2. Fully submerge the suction basket.
3. Open the tank lid.
4. Press the button [1]. Wait until the valve is in
the correct position: .
5. Press the button [2]. Wait until the valve is in
the correct position: .
6. Press the button [3] to switch the agitation on
or off:
on. off (in case of too much
foaming).
7. Close the manually operated drain valve
below the spray pump unit or close the elec-
tric drain valve (option):
Press the button [4]. Wait until the valve is in
the correct position: .
8. Press the button below the symbol .
Press the button below the symbol .
The spray pump switches on.
The symbol becomes green: .
9. Make sure that the spray tank does not over-
flow.
10. Switch the spray pump off when the desired
contents has been reached:
Press the button below the symbol .
The spray pump switches off.
The symbol becomes gray: .
11. Disconnect the suction hose.
12. Close the tank lid.
1 2
3
4