agrifac Condor C03, Руководство пользователя

Страница: 118 / 250

OPERATION
118
Condor-UM-2011-21-R0-en-us-20210108
No. Description

1 Simulation speed (a minimum speed for the application rate control).
When you decrease the spray speed, the application rate control will de-
crease the spray pressure. Below a certain spray speed, the pressure will
be decreased below the working range of the spray nozzle: the spray
nozzles start to drip. You can enter a simulation speed to prevent the
pressure from decreasing below the working range, to prevent nozzle
dripping if you briefly have to maneuver at a low speed.
Determine in practice at which spray speed the spray nozzles start to
drip. If this speed is 3 mph, you can for example enter a simulation speed
of 3.5 mph.
1. Press the button [1]. The numeric keypad [5] appears.
2. Enter the simulation speed. If necessary, press the button [6] for
corrections. By pressing cancel [8], the numeric keypad disappears
without making any changes.
3. Press the button [7] to confirm the value.
NOTICE
At spray speeds below the entered simulation speed, the liquid applica-
tion rate (GPA) will be too high. Work as little as possible below the simu-
lation speed to prevent crop damage.
2 Message on the main screen: “Spray tank. Level is too low” .
1. Press the button [2]. The numeric keypad [5] appears.
2. Enter the value at which you want to receive the message. If neces-
sary, press the button [6] for corrections. By pressing cancel [8], the
numeric keypad disappears without making any changes.
3. Press the button [7] to confirm the value.
3 Message on the main screen: “Spray pressure is too low” .
1. Press the button [3]. The numeric keypad [5] appears.
2. Enter the value at which you want to receive the message. If neces-
sary, press the button [6] for corrections. By pressing cancel [8], the
numeric keypad disappears without making any changes.
3. Press the button [7] to confirm the value.
4 Press this button to go back to the main page.