agrifac Condor C03, Руководство пользователя

Страница: 84 / 250

OPERATION
84
Condor-UM-2011-21-R0-en-us-20210108
Condor 2, 3 and 4:
1.
Switch electrical components off.
2.
Remove the ignition key from the ignition switch.
Take the ignition key with you.
3.
Turn the key of the battery switch counterclock-
wise [1].
4.
Place the auxiliary batteries [2] next to the ma-
chine (as shown).
5.
Connect the (+) and (–) terminal of the auxiliary
batteries with the jumper cable [4]. These batter-
ies are now connected “in series” and produce 24
Volts.
6.
Remove the cover [5].
7.
Put the clamp [6] on the (+) terminal of the bat-
tery [3] in the machine.
8.
Put the clamp [7] on the (+) terminal of the auxil-
iary battery.
9.
Put the clamp [8] on the (–) terminal of the auxil-
iary battery.
10.
Put the clamp [9] on a bolt on the engine. Do not
put the clamp [9] on a battery terminal: sparks
could ignite an explosive gas escaping from the
battery.
11.
Check that the jumper cables do not contact ro-
tating parts of the engine.
12.
Turn the key of the battery switch clockwise [10].
13.
Start the engine (  82 ).
14.
Remove the clamps in this sequence: [9], [8], [7],
[6] and place the cover [5] back.
15.
Remove the auxiliary batteries.