agrifac Condor C03 Скачать руководство пользователя страница 63

Страница: 63 / 250

OPERATION

Condor-UM-2011-21-R0-en-us-20210108

5.5

Driver’s seat, armrest and steering column

WARNING

Adjust the driver’s seat to prevent serious physical problems. Stop driving be-

fore you adjust the driver’s seat, the armrest or the steering column.

Adjusting the driver’s seat
Grammer MSG95G (since 2019):

Sit down on the driver’s seat.

Turn the ignition on.

•

Weight and height adjustment:

•

Push the lever [1] down or pull the lever up.

Do not pull the lever up longer than 1 minute
to prevent compressor damage.

•

Release the lever when the seat has

reached the desired height.

•

Look at the weight and height indicator [2].

The indicator must be fully green.

•

If the indicator is yellow or yellow/green:

change the seat height with the lever [1] until
the indicator [2] is fully green.

•

Pull the lever [3] up and move the seat for-
ward or rearward.

•

Pull the lever [4] up and move the seat cush-
ion forward or rearward.

•

Pull the lever [5] up and adjust the angle of
the seat cushion.

•

Pull the lever [6] up and adjust the angle of
the backrest.

•

Adjust the angle of the armrest with the turn-
ing knob [7].

•

Adjust the lumbar support with the turning
knob [8].

•

Lock or unlock the horizontal suspension
with the lever [9].

•

Adjust the damping with the lever [10]. De-
termine the optimum adjustment in practice.

Содержание Condor C03



























































































































































































































































Результаты поиска

Содержание Condor C03

Отзывы:

Похожие инструкции для Condor C03

Бренды по названию

Популярные бренды

agrifac Condor C03, Руководство пользователя

Результаты поиска

Содержание Condor C03

Отзывы:

Похожие инструкции для Condor C03

Бренды по названию

Популярные бренды