PRINTED IN JAPAN Feb.’10 PDF . DS-299B
Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.
TEAC CORPORATION
( http://www.teac.co.jp ) 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan Phone:81-42-356-9153 Fax:81-42-356-9184
TEAC AMERICA, INC.
( http://www.teac.com ) 7733 Telegraph Road, Montebello, California 90640, U.S.A. Phone:1-323-726-0303 Fax:1-323-727-7656
TEAC EUROPE GmbH.
( http://www.teac.de ) Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany Phone:49-611-71580 Fax:49-611-7158-392
TAIWAN TEAC CORPORATION
( http://www.teac.com.tw ) 3F No.45, Sec.1 Min Chuan E. Road, 104 Taipei, Taiwan R.O.C. Phone:886-2-2597-8608 Fax:886-2-2597-8591
TEAC ELECTRONICS ( M ) SDN BHD
( http://www.teac.com.my ) Lot 22, Batu Berendam Ftz
Ⅲ
, Batu Berendam, 75350 Melaka, Malaysia. Phone:60-6-2843402 Fax:60-6-2843471
© Copyright TEAC CORPORATION 2010
Data Storage Products Division
DVD Super Multi USB Interface Drive
DV-W28U-V
■ Half inch height ( 12.7mm ) standard design with USB Interface
■ Buffer underrun prevention
■ Supporting disc-at-once, session-at-once, packet write, incremental,
over write, track-at-once recording mode, sequential write, multi-session,
and back ground format
■ Horizontal and vertical mounting for most system configuration
is a trademark of DVD Format/Logo Licensing Corporation registered
in the U.S., Japan and other countries.
are trademarks of Koninklijke Philips Electronics N.V .
and
Write Speed
DVD+R
8x ( CAV )
( Max Speed )
DVD+R DL
6x ( ZCLV )
DVD-R
8x ( CAV )
DVD-R DL
6x ( ZCLV )
DVD+RW
8x ( ZCLV )
DVD-RW
6x ( ZCLV )
DVD-RAM
5x ( ZCLV )
CD-R
24x ( CAV )
CD-RW
US
24x ( ZCLV )
HS
10x ( CLV )
MS
4x ( ＣＬＶ )
Read Speed
DVD-ROM
8x ( CAV )
( Max Speed )
DVD R
8x ( CAV )
DVD+R DL ( Finalized Disc ) 8x ( CAV )
DVD-R DL ( Finalized Disc ) 6x ( CAV )
DVD RW
8x ( CAV )
DVD-RAM ( 4.7G )
5x ( ZCLV )
CD-ROM
24x ( CAV )
CD-R/RW
24x ( CAV )
CD-DA ( DAE )
24x ( CAV )
Disc Diameter
12cm, 8cm
Interface
USB 2.0
Interface Connector
Mini B Type USB / DC IN 5V ( Diameter 4mm )
Serial ATA ( SATA )
Data Transfer Rate
480M bps at high speed, 12M bps at full speed
Access Time
200ms ( typ )
Data Buffer
2MB
Loading Mechanism
Drawer Type
Environmental Condition
Ambient Temperature Operating
5 to 45℃
Non Operating
-20 to 60℃
Transportation
-40 to 65℃
Ambient Humidity
Operating
8 to 80% ( non-condensing ) *
Non Operating
5 to 95% ( non-condensing ) *
Transportation
5 to 95% ( non-condensing ) *
Power Requirements
DC5V 5%
Current Consumption
Standby / Sleep 150mA ( Average current max )
During starting / Seek 1500mA ( Max, Spikes less 1ms )
MTBF
60,000POH ( 10% duty )
Safty / EMI Standards UL, CUL, TÜV, CB, CE and BSMI
USB Logo
Not available
Dimensions
128.0W x 12.7H x 129.4D ( mm )
Mass ( Weight )
172g or less
RoHS
Complied
Remark
Please check the specification sheets for detailed conditions and other information.
＊ The maximum wet-bulb temp. is 29.4 degree C
8x DVD R
6x DVD R DL
8x DVD
＋
RW
6x DVD
RW
8x DVD R
6x DVD R DL
8x DVD
＋
RW
6x DVD
RW
(MINIMUM V
ALUE OF
SCREW INSERTING LENGTH)
1.4ＭＩＮ
FRAME,MAIN
MOUNTING SCREW
Fig.2
(MAXIMUM V
ALUE OF
SCREW INSERTING LENGTH)
2.5MAX
(USB MINI CONNECTOR CL.)
5.3
±0.38
5.05
±0.38
(M2 T
AP CENTER)
(DC IN CONNECTOR CL.)
3.8
±0.2
5.7
±0.2
USB MINI CONNECTOR
DC IN
DEPTH 2.5MAX. 1.4MIN.
30
48.8
±0.2
61.3
±0.2
27.3
±0.2
102.6
CLAMPING TORQUE:0.255N・m MAX(2.6kg・cm MAX)
RECOMMENDATION TORQUE:0.176N・m〜0.235N・m
(1.8kg・cm〜2.4kg・cm)
4-M2 TAPPED HOLES FOR INSTALLATION
6.8
REFER TO Fig.2
MOUNTING SCREW
FRAME,MAIN
1.4MIN
(MINIMUM VALUE OF
SCREW INSERTING LENGTH)
2MAX
(MAXIMUM VALUE OF
SCREW INSERTING LENGTH)
Fig.1
REFER TO Fig.1
(LEFT SIDE
X
1,RIGHT SIDE
X
3)
DEPTH 2.0MAX. 1.4MIN.
4-M2 TAPPED HOLES FOR INSTALLATION.
CLAMPING TORQUE:0.255N・m MAX(2.6kg・cm MAX)
RECOMMENDATION TORQUE:0.176N・m〜0.235N・m
(1.8kg・cm〜2.4kg・cm)
(DC IN CONNECTOR CL.)
USB MINI CONNECTOR
(USB MINI CONNECTOR CL.)
128
(25.4)
REFER TO Fig.2
CLAMPING TORQUE:0.255N・m MAX(2.6kg・cm MAX)
RECOMMENDATION TORQUE:0.176N・m〜0.235N・m
(1.8kg・cm〜2.4kg・cm)
2-M2 TAPPED HOLES FOR INSTALLATION.
DEPTH 2.5MAX.1.4MIN.
27.25
14.25
10
±0.2
(25.4)
(129.4)
12.7
3
±0.2
82.8
±0.2
89.45
2.6
126.1
CONVEX:0.7
96.55
19.45
ACCESS INDICATOR
EJECT BUTTON
EMERGENCY HOLE(∅1.6)
3.3
±0.2
9.9
+0.4
-0.25
27.3
±0.2
11.2
±0.2
72.7
128.4±0.2
83.2
94.2
4.5
4.2 6.15
(102.8)
(25.6)
13.2±0.2
4-R0.3
3.3
2.4
0.7
9.9
+0.4
-0.25
3.3
±0.2
82.8
±0.2
27.3
±0.2
11.2
±0.2
DV-W28U-xx
(Unit:mm)
(±0.4)
(NOTE)THIS SIDE VIEW IS FOR BEZEL ONLY.
BEZEL:GENERIC TYPE
DC IN
