99
99
18. Gather the throttle servo and hardware as shown
below:
◊
1 - Throttle Servo with mounting screws
◊
2 - 4-40 Ball links
◊
2 - 4-40 Screws
◊
2 - Flat washers
◊
2 - 4-40 Lock nuts
◊
1 - Brass Spacer
◊
1 - Flexible throttle cable
◊
1 - Throttle cable guide tube
◊
1 - Plywood pushrod support
◊
2 - Brass Couplers
19. Solder one brass coupler that will attach to the
servo onto the cable and pass the cable out
through the front of the fuse.
20. Solder the brass coupler to the flex cable and
attach the 4-40 ball link to the throttle arm as
shown below.
21. Attach the 4-40 ball link to the throttle servo as
shown below. Glue the plywood pushrod sup-
port to the fuse former as shown.
22. Position the ignition module on the firewall and
mark the location of the nylon tie holes as
shown.
Pushrod
Support
